Ready for Every Action!
Shock Absorber System for 3-Axis Gimbals
Provides Ultimate Experience In Vehicular Stabilization.
Best Possible Damping, Peak Shock Absorption, Lifting Capacity and Stability.
Proaim Airwave Vibration Isolator Arm!
The Proaim Airwave Isolator Arm is a 3-axis dampening system with an additional Anti-Vibration Mount for stabilizing roll and tilt errors as well as vertical motion and vibrations. The Airwave arm is especially designed to be used with Handheld 3-Axis Camera Gimbals like DJI Ronin, Movi and Shotover G1. The Isolator Arm with Anti-Vibration Mount softens the vibrations typically experienced when shooting from moving platforms on rough terrain. Not only does it helps to stabilise the image, it also lessens the load on the motors of the Gimbal that now only have to work to stabilise a softened, smoother range of vibrations. It’s a hard mount system, made for gimbals that you want to mount on vehicles such as cars, ATVs, boats, snowmobiles etc.
"WHAT YOU SEE IS WHAT YOU GET"
|
Mounting Options Mounting the Airwave Arm is as simple as clamping it on to a standard 38-65mm Pole. Simply clamp the Arm on Pole (not included) with two single clamps at back of the arm. Some extra of the standard grip components like Poles and clamps can be mixed to provide different types of vehicle configurations. |
|
|
Proaim Pole (Mitchell Base) Not Included Proaim has launched a new Pole (Speed Rail / Scaffold Mount / Tube) for Proaim Airwave Vibration Isolator Arm. With the introduction of this new mount, the Proaim Shock Absorber’s range of operation broadens to allow direct fitting to Scaffold and Speed Rail Camera Rigs built on tracking vehicles, motorbike and boat rigs etc. The Pole has Mitchell mounting configuration on bottom. Standard available height is 36” and diameter is 50mm. |
|
IMAGE GALLERY
The Supportive accessories are for demonstration purpose only.
